SMD3014 10W LED ceilling light with MC sensor

SMD3014 10W LED ceilling light with MC sensor

This is a microwave sensor switches controlled LED lights,the microwave sensor was built into the lamp,it has 96pcs high brightness LEDs inside by SMD3014,with total power of 10 watts.Power consumption of LED bulb light is just 20% of the traditional incandescent lamp,the microwave sensor switch is a new type automatic switch that comes after vice switch,and infrared sensor switch.The detection way has the below advantages compared with other as follows:

Feaures and Functions of SMD3014 10W LED ceilling light with Microwave sensor:

1. Adopting LED SMD3014 as light source. Energy-saving,environment protecting and long life.

2. Using constant current to drive,Low working voltage,Low power consumption,Good color saturation.Secure and reliable.

3. Simple installation and easy wiring.

4. Transmission power only 0.3mW,It will not harm the human body.

5. Color effects: White (according to your different scene demand, we can configure for you different color temperature of LED light source.

6. We adopt this sensitive advanced sensor switche inlighting control,enabling the light to turn on automatically when one comes, automatically turn off when one goes out.

7. The built-in microwave sensor switch can penetrate plastic,glass,wood.So LED ceiling light with microwave sensor with high sensitivity.

Applications of SMD3014 10W LED ceilling light with Microwave sensor:

Widely used in the widely usage in the aisle stairs,living room and bedrooms,it also can be installed in the bathroom,etc.

Mechanical Dimensions:

Notes:
1. All dimension units are millimeters.(mm)
2. All dimension tolerance is +/- 1.0 unless special notice.

Technology parameter:

Name: SMD3014 10W led ceiling with microwave sensor
Source: SMD3014 by TAIWAN Epistar
Power consumption: 10W
Lighting source: LED=0.1W
LED quantity: 96 pcs
LED color: white(2700-3000K,3000K-3300K,4000-4500K,5500-6000K)
PCB: excellent thermal conductivity of alminum plate
Total illuminance: 1000-1056LM
Beam angle: 120 degree
Sensing distance: 1 to 8 meters
Input voltage: AC85-265V
Delay adjustment: 30 socends ~2 minutes
Size: ￠225*H68mm
Material : Aluminum alooy + Acrylic
Shell color: fog silver oxide + white
IP Rating: IP54
Operating temperature: -20℃~+40 ℃
Lifespan: 50000hr
Net weight: 340g
Inner bo size : W230*H70*L230mm
Outer packing size: W480*H720*L480
Inner box quantity: 1 set/box
Outer package quantity: 20 set/box

Spectrogram:

                        Testing condition: None break operation

You can freely adjust according to the needs of the scene and personal preference:

1. Distance adjustment method: clockwise,sensing decreased; counterclockwise,sensing increased.
2. Luminance adjustment method: counterclockwise, mode during the day; clockwise to the end,night mode.
3. Time adjustment method: clockwise,time increase,counterclockwise,time shortening.

Induction range:

Installation Instruction:

The first:

The second:

The third:

Package:

  
Tip:

1. Ensuring a solid connection correctly in order to avoid short-circuit damage to components and trigger fires.
2. Installed in a well-ventilated place to ensure approprite environmental temperature.
3. Using this product,please check the local voltage compliance product requirements.
4. To prohibit the live wiring,check to confirm wiring is correct,check the no short-circuit,and then power!
5. In case of failures,do nt maintenance in priavate.
6. Cannot be put on a strong magnetc place ( for example: steel desk),beacuse magnetic fields of interference can influence alertness and sensing distance.

Interested in it?
Pls feel free to contact Amber Zhu: amberzhu0915@gmail.com, or call Amber Zhu:+86 Mob: +86 18948177087, or add Amber Zhu's skype account: amber.zhu88,or add Amber Zhu's MSN: amber.zhu@live.com

18W LED down light with IR Sensor

18W LED down light with IR Sensor

Different material and different process,extraordinary quality.
1. By high thermal conductivity of the aluminum plate, built-in radiator.
2. The quality and stability of large-size chip,and high color rendering index of high-power lamp beads
3. High-power lamp beads before soldering,unity in the thermal conductivity of aluminum plate coated with a layer of thermal grease particularly good.
4. Best of the welding temperature,and the temperature has remained stable level.
5. Choose the best angle of the lens,to ensure uniformity of light effects,balanced and consistent.
6. The reasonable choice of best practice with the lamp shell,aluminum plate to closely aligns the lamp shell,be sure aluminum plate with good heat conduction between lamps.
7. The lamp aging test shall not be less than 24 hours.
8. When the aging test is oki, the good light welded aluminum plate with a bead of silicone potting,the lamps waterproof implemented.
9. The all process what we did will be checked before assembly it.
10.Porduct assembly,re-aging,check the assembly process has not been affected by improper assembly,extrusion lighting line.

Features and functions of 18W LED downlights with IR:
1. Adopting high-power LED as light source.Energy-saving,environment protecting and long life.
2. Using constant current to drive.
3. Low working voltage,secure and reliable.
4. Low power consumption,good color saturation.
5. Color effects: White (according to your different scene demand,we can configure for your different color temperature of LED light source).
6. Power consumption of LED down light is just 20% of the traditional incandescent lamp.The life span of LED down light is over 10 times longer than the fluorescent lamp.Easy to install,use safe and stable.Intelligent,energy saving,environmental protection.
7. LED downlight with IR have special sensor detecting brightness surrounded and body temperature,it will be bright for about 60 seconds when people come near within 5 meters on condition that the illumination outside is under 10LX,this function closes automatically when the illumination is over 10LX,totally not affected by noise or surronding factors.

Applications of 18W LED downlights with IR:
Widely used in corridor,washing room, storeroom,balcony,hallway,etc.

Mechanical Dimensions:

Notes:
1. All dimension units are millimeters.(mm)
2. All dimension tolerance is +/-1.0 unless special notice

Technology parameter:

Name: 18W LED downlights with IR
Soruce: LED high power by Cree,Edison,or the same level of quality and stability of large-size chip
Power consumption: 18W
Lighting source: LED =3W
LED quantity: 6pcs
LED color: white(2700-3000K,3000K-3300K,4000-4500K,5500-6000K)
PCB: excellent thermal conductivity of aluminum plate
Beam angle: 25°, 30°,35°,45°,60°,90°
Input voltage: AC85-265V
Size: ∮107*∮92*H100 mm
Material: aluminum alloy
Shell color: fog silver oxide
IP rating: IP54
Operating temperature: -20℃~+40℃
Lifespan: 50,000hr
Net weight: 320g
Inner box size: W140*H115*L140 mm
Outer package size: W565*H360*L565 mm
Inner box qty: 1 set/ box
Outer package qty: 48 set/ box

Lumen Attenuation:

Packing:
Size: ∮107*∮92*H100 mm
Net weight: 320g
Inner box size: W140*H115*L140 mm
Outer package size: W565*H360*L565 mm
Inner box qty: 1 set/ box
Outer package qty: 48 set/ box
Carton package qty:48 set/ctn
Net weight: 15.5kg
Gross weight:19kg

Tip:
1. Ensuring a solid connection correctly in order to avoid short-circuit damage components and trigger fires.
2. Installed in a well-ventilated place to ensure appropriate environment temperature.
3. Using this product,please check the local voltage compliance product requirments
4. To prohibit the live wiring,check to confirm wiring is correct,check the no short-circuit,and then power!
5. In case of failures,do not maintenance in private.

Interested in it?
Pls feel free to contact Amber Zhu: amberzhu0915@gmail.com, or call Amber Zhu:+86 Mob: +86 18948177087 or add Amber Zhu's skype account: amber.zhu88,or add Amber Zhu's MSN: amber.zhu@live.com