30W LED flood light for factory,gym,dock,billboard,building,tunnel,landscape,city lighting projects
Features:
1. The light source adpots the integration of imported single high power LED ,with the special design of integrating many chips into one lighting source.
2. The crust in aluminum alloy die casting ensures the efficiency of heat emission,guaranteeing the light a long life span.
3. The high pure imported aluminum from Germany as the reflector has high reflecting efficiency,and it can make sure the luminous flux,controlling the light inside of a useful area.It improves the efficency of light uniformity and utilization,showing the LED advantage of energy saving.
4. The integration of 5mm high strength roughened glass and the housing makes the light work perfectly in the high humidity environments.
5. New high efficiency constant current driver.Wide range of input voltage:AC100-240V.
6. No delay start.No waiting.It can reach its normal light as soon as it is turned on.No noise.
7 No electrical wave,conforming to CE.
8 Environment friendly and no air pollution.We exert the design of using cold light source.It's no heat radiation.There is no ill to our eyes and skin.The floodlights do not have lead,hydrargyrum and any other contamination.It is really environment friendly with RoHS certificate.
Applications:
Factory,gym,dock,billboard,building,tunnel,landscape,city lighting projects.
Light distribution graph:
Illumination intensity chart:
Demensions:
Notes:
1. All dimension units are milimeters.
2. All dimension tolerance is +/- 0.5mm unless otherwise noted.
Packing:
Inner Carton: 235*195*165 mm (1pcs/ctn)
Outer Carton: 480*400*345 mm (8pcs/ctn)
G.W:21kg
Safety Notice for Using:
1. Please always use the light out of its package.
2. Before starting use of the light,please check if the light was damaged during transportation.If any damage shown,please Do not install or use it.
3.Any maintenance should be performed by trained professional only.
4. Keep packaging materials away from the reach of children and pets.Risks of suffocation!
5. Caution: The packaging contains small parts that may be swallowed by children.
6. Never leave childern unattended in the vicinity of the lights and do not allow them to play with electrical devices.
7. Try to avoid looking directly in the LED beam-especially for extended periods of time.Do not shine the LED light in another person's eyes.
8. Never cover the light by other objectts.
9. The products need to re-pair,inspection or special treatment of retirement after service time.
10. The products need to re-pair,inspection or special tratment of retirement after service time.
Maintenance:
1. Prior to cleaning the light,make sure it has been disconnected from the power supply.
2. Use a dry or slightly moistened cloth for cleaning.
3. Never use any chemicals or abrasives for cleaning.
Proposal:
Used electronic devices must be collected for recycling and can not be deposited together with daily garbage.
Installation:
1. This product should be installed by trained electricians.
2. Check integrality of the products when unpack the packing.
3. When laying the cables,make sure that the cables and plugs are not subjected to any tensile or twisting forces. Fit the cable tension relieving mechanisms to the connection points of the surface-mounted lights.Do not kink cables.Output cables should be laid separately and at a distance from other cables.
4. Proceed by connecting the wiring cables to the luminaries.Usually,the brown(or black) wire is the ive wire,connect it with the terminal marked "L".The blue wire is Naughty wire,connect it with the terminal marked"N".
5. Used only the LED driver included,and do not connect the surface-mounted lights to other loads.
6. Do not remove the name plate of the power supply and driver of the light.
Notes:
Non-professionals are not allowed to disassemble and maintain the products.We have the right not to provide after-sales service if unauthorized disassembly and maintenance happens to the products.
Any comments, please feel free to contact Amber Zhu: amberzhu0915@gmail.com or call Amber Zhu: +86 18948177087 ,or add Amber Zhu's skype account: amber.zhu88
Features:
1. The light source adpots the integration of imported single high power LED ,with the special design of integrating many chips into one lighting source.
2. The crust in aluminum alloy die casting ensures the efficiency of heat emission,guaranteeing the light a long life span.
3. The high pure imported aluminum from Germany as the reflector has high reflecting efficiency,and it can make sure the luminous flux,controlling the light inside of a useful area.It improves the efficency of light uniformity and utilization,showing the LED advantage of energy saving.
4. The integration of 5mm high strength roughened glass and the housing makes the light work perfectly in the high humidity environments.
5. New high efficiency constant current driver.Wide range of input voltage:AC100-240V.
6. No delay start.No waiting.It can reach its normal light as soon as it is turned on.No noise.
7 No electrical wave,conforming to CE.
8 Environment friendly and no air pollution.We exert the design of using cold light source.It's no heat radiation.There is no ill to our eyes and skin.The floodlights do not have lead,hydrargyrum and any other contamination.It is really environment friendly with RoHS certificate.
Applications:
Factory,gym,dock,billboard,building,tunnel,landscape,city lighting projects.
MAIN SPECIFICATIONS (T=26℃)
| ||
NUMBER
|
ITEM
|
DESCRIPTION
|
01
|
Input Voltage
|
AC100-240V 50~60Hz
|
02
|
LED
|
1 PC
|
03
|
Power
|
30W
|
04
|
LED Efficiency
|
80-90Lm/W
|
05
|
Initial Flux
|
>2400Lm (Cool White)
>2410Lm (Natural White)
>2320Lm (warm white)
|
06
|
Power factor
|
>0.97
|
07
|
Color
|
Warm White /Natural White / Cool White/Red/Green/Blue/Yellow
|
08
|
Color Temperature
|
2700-3300K (Warm White)
4000-5000K (Natural White)
5300-7000K (Cool White)
|
09
|
Center Illuminance
|
2M:226 Lux
4M:69Lux
6M:34Lux
|
10
|
Beam Angle
|
100°
|
11
|
Life Time
|
>50,000 Hours
|
12
|
Operating Temperature
|
-40℃ to +55℃
|
13
|
Storage Temperature
|
-25℃ to +65℃
|
14
|
Connect Wire
|
Brown（L）
Blue（N）
Yellow/Green（G）
|
15
|
Certifications
|
CE, RoHS
|
16
|
Weight
|
2.3KG
|
17
|
Size
|
225×185×130mm
|
18
|
IP Code
|
IP65
|
Light distribution graph:
LED Lumen Attenuation:
Operating time(hours)
|
Lumen decrease(%)
|
5,000
|
2.4
|
10,000
|
5.2
|
20,000
|
11.3
|
50,000
|
24.5
|
Demensions:
Notes:
1. All dimension units are milimeters.
2. All dimension tolerance is +/- 0.5mm unless otherwise noted.
Packing:
Inner Carton: 235*195*165 mm (1pcs/ctn)
Outer Carton: 480*400*345 mm (8pcs/ctn)
G.W:21kg
Safety Notice for Using:
1. Please always use the light out of its package.
2. Before starting use of the light,please check if the light was damaged during transportation.If any damage shown,please Do not install or use it.
3.Any maintenance should be performed by trained professional only.
4. Keep packaging materials away from the reach of children and pets.Risks of suffocation!
5. Caution: The packaging contains small parts that may be swallowed by children.
6. Never leave childern unattended in the vicinity of the lights and do not allow them to play with electrical devices.
7. Try to avoid looking directly in the LED beam-especially for extended periods of time.Do not shine the LED light in another person's eyes.
8. Never cover the light by other objectts.
9. The products need to re-pair,inspection or special treatment of retirement after service time.
10. The products need to re-pair,inspection or special tratment of retirement after service time.
Maintenance:
1. Prior to cleaning the light,make sure it has been disconnected from the power supply.
2. Use a dry or slightly moistened cloth for cleaning.
3. Never use any chemicals or abrasives for cleaning.
Proposal:
Used electronic devices must be collected for recycling and can not be deposited together with daily garbage.
Installation:
1. This product should be installed by trained electricians.
2. Check integrality of the products when unpack the packing.
3. When laying the cables,make sure that the cables and plugs are not subjected to any tensile or twisting forces. Fit the cable tension relieving mechanisms to the connection points of the surface-mounted lights.Do not kink cables.Output cables should be laid separately and at a distance from other cables.
4. Proceed by connecting the wiring cables to the luminaries.Usually,the brown(or black) wire is the ive wire,connect it with the terminal marked "L".The blue wire is Naughty wire,connect it with the terminal marked"N".
5. Used only the LED driver included,and do not connect the surface-mounted lights to other loads.
6. Do not remove the name plate of the power supply and driver of the light.
Notes:
Non-professionals are not allowed to disassemble and maintain the products.We have the right not to provide after-sales service if unauthorized disassembly and maintenance happens to the products.
Any comments, please feel free to contact Amber Zhu: amberzhu0915@gmail.com or call Amber Zhu: +86 18948177087 ,or add Amber Zhu's skype account: amber.zhu88
No comments:
New comments are not allowed.