SMD3014 10W LED ceilling light with MC sensor

SMD3014 10W LED ceilling light with MC sensor

This is a microwave sensor switches controlled LED lights,the microwave sensor was built into the lamp,it has 96pcs high brightness LEDs inside by SMD3014,with total power of 10 watts.Power consumption of LED bulb light is just 20% of the traditional incandescent lamp,the microwave sensor switch is a new type automatic switch that comes after vice switch,and infrared sensor switch.The detection way has the below advantages compared with other as follows:

Feaures and Functions of SMD3014 10W LED ceilling light with Microwave sensor:

1. Adopting LED SMD3014 as light source. Energy-saving,environment protecting and long life.

2. Using constant current to drive,Low working voltage,Low power consumption,Good color saturation.Secure and reliable.

3. Simple installation and easy wiring.

4. Transmission power only 0.3mW,It will not harm the human body.

5. Color effects: White (according to your different scene demand, we can configure for you different color temperature of LED light source.

6. We adopt this sensitive advanced sensor switche inlighting control,enabling the light to turn on automatically when one comes, automatically turn off when one goes out.

7. The built-in microwave sensor switch can penetrate plastic,glass,wood.So LED ceiling light with microwave sensor with high sensitivity.

Applications of SMD3014 10W LED ceilling light with Microwave sensor:

Widely used in the widely usage in the aisle stairs,living room and bedrooms,it also can be installed in the bathroom,etc.

Mechanical Dimensions:

Notes:
1. All dimension units are millimeters.(mm)
2. All dimension tolerance is +/- 1.0 unless special notice.

Technology parameter:

Name: SMD3014 10W led ceiling with microwave sensor
Source: SMD3014 by TAIWAN Epistar
Power consumption: 10W
Lighting source: LED=0.1W
LED quantity: 96 pcs
LED color: white(2700-3000K,3000K-3300K,4000-4500K,5500-6000K)
PCB: excellent thermal conductivity of alminum plate
Total illuminance: 1000-1056LM
Beam angle: 120 degree
Sensing distance: 1 to 8 meters
Input voltage: AC85-265V
Delay adjustment: 30 socends ~2 minutes
Size: ￠225*H68mm
Material : Aluminum alooy + Acrylic
Shell color: fog silver oxide + white
IP Rating: IP54
Operating temperature: -20℃~+40 ℃
Lifespan: 50000hr
Net weight: 340g
Inner bo size : W230*H70*L230mm
Outer packing size: W480*H720*L480
Inner box quantity: 1 set/box
Outer package quantity: 20 set/box

Spectrogram:

                        Testing condition: None break operation

You can freely adjust according to the needs of the scene and personal preference:

1. Distance adjustment method: clockwise,sensing decreased; counterclockwise,sensing increased.
2. Luminance adjustment method: counterclockwise, mode during the day; clockwise to the end,night mode.
3. Time adjustment method: clockwise,time increase,counterclockwise,time shortening.

Induction range:

Installation Instruction:

The first:

The second:

The third:

Package:

  
Tip:

1. Ensuring a solid connection correctly in order to avoid short-circuit damage to components and trigger fires.
2. Installed in a well-ventilated place to ensure approprite environmental temperature.
3. Using this product,please check the local voltage compliance product requirements.
4. To prohibit the live wiring,check to confirm wiring is correct,check the no short-circuit,and then power!
5. In case of failures,do nt maintenance in priavate.
6. Cannot be put on a strong magnetc place ( for example: steel desk),beacuse magnetic fields of interference can influence alertness and sensing distance.

Interested in it?
Pls feel free to contact Amber Zhu: amberzhu0915@gmail.com, or call Amber Zhu:+86 Mob: +86 18948177087, or add Amber Zhu's skype account: amber.zhu88,or add Amber Zhu's MSN: amber.zhu@live.com

18W LED down light with IR Sensor

18W LED down light with IR Sensor

Different material and different process,extraordinary quality.
1. By high thermal conductivity of the aluminum plate, built-in radiator.
2. The quality and stability of large-size chip,and high color rendering index of high-power lamp beads
3. High-power lamp beads before soldering,unity in the thermal conductivity of aluminum plate coated with a layer of thermal grease particularly good.
4. Best of the welding temperature,and the temperature has remained stable level.
5. Choose the best angle of the lens,to ensure uniformity of light effects,balanced and consistent.
6. The reasonable choice of best practice with the lamp shell,aluminum plate to closely aligns the lamp shell,be sure aluminum plate with good heat conduction between lamps.
7. The lamp aging test shall not be less than 24 hours.
8. When the aging test is oki, the good light welded aluminum plate with a bead of silicone potting,the lamps waterproof implemented.
9. The all process what we did will be checked before assembly it.
10.Porduct assembly,re-aging,check the assembly process has not been affected by improper assembly,extrusion lighting line.

Features and functions of 18W LED downlights with IR:
1. Adopting high-power LED as light source.Energy-saving,environment protecting and long life.
2. Using constant current to drive.
3. Low working voltage,secure and reliable.
4. Low power consumption,good color saturation.
5. Color effects: White (according to your different scene demand,we can configure for your different color temperature of LED light source).
6. Power consumption of LED down light is just 20% of the traditional incandescent lamp.The life span of LED down light is over 10 times longer than the fluorescent lamp.Easy to install,use safe and stable.Intelligent,energy saving,environmental protection.
7. LED downlight with IR have special sensor detecting brightness surrounded and body temperature,it will be bright for about 60 seconds when people come near within 5 meters on condition that the illumination outside is under 10LX,this function closes automatically when the illumination is over 10LX,totally not affected by noise or surronding factors.

Applications of 18W LED downlights with IR:
Widely used in corridor,washing room, storeroom,balcony,hallway,etc.

Mechanical Dimensions:

Notes:
1. All dimension units are millimeters.(mm)
2. All dimension tolerance is +/-1.0 unless special notice

Technology parameter:

Name: 18W LED downlights with IR
Soruce: LED high power by Cree,Edison,or the same level of quality and stability of large-size chip
Power consumption: 18W
Lighting source: LED =3W
LED quantity: 6pcs
LED color: white(2700-3000K,3000K-3300K,4000-4500K,5500-6000K)
PCB: excellent thermal conductivity of aluminum plate
Beam angle: 25°, 30°,35°,45°,60°,90°
Input voltage: AC85-265V
Size: ∮107*∮92*H100 mm
Material: aluminum alloy
Shell color: fog silver oxide
IP rating: IP54
Operating temperature: -20℃~+40℃
Lifespan: 50,000hr
Net weight: 320g
Inner box size: W140*H115*L140 mm
Outer package size: W565*H360*L565 mm
Inner box qty: 1 set/ box
Outer package qty: 48 set/ box

Lumen Attenuation:

Packing:
Size: ∮107*∮92*H100 mm
Net weight: 320g
Inner box size: W140*H115*L140 mm
Outer package size: W565*H360*L565 mm
Inner box qty: 1 set/ box
Outer package qty: 48 set/ box
Carton package qty:48 set/ctn
Net weight: 15.5kg
Gross weight:19kg

Tip:
1. Ensuring a solid connection correctly in order to avoid short-circuit damage components and trigger fires.
2. Installed in a well-ventilated place to ensure appropriate environment temperature.
3. Using this product,please check the local voltage compliance product requirments
4. To prohibit the live wiring,check to confirm wiring is correct,check the no short-circuit,and then power!
5. In case of failures,do not maintenance in private.

Interested in it?
Pls feel free to contact Amber Zhu: amberzhu0915@gmail.com, or call Amber Zhu:+86 Mob: +86 18948177087 or add Amber Zhu's skype account: amber.zhu88,or add Amber Zhu's MSN: amber.zhu@live.com

100° beam angle,100W LED flood light for factory,gym,dock,billboard,building,tunnel,landscape,city lighting projects

100° beam angle,100W LED flood light for factory,gym,dock,billboard,building,tunnel,landscape,city lighting projects

Features:

1. The light source adpots the integration of imported single high power LED ,with the special design of integrating many chips into one lighting source.

2. The crust in aluminum alloy die casting ensures the efficiency of heat emission,guaranteeing the light a long life span.

3. The high pure imported aluminum from Germany as the reflector has high reflecting efficiency,and it can make sure the luminous flux,controlling the light inside of a useful area.It improves the efficency of light uniformity and utilization,showing the LED advantage of energy saving.

4. The integration of 5mm high strength roughened glass and the housing makes the light work perfectly in the high humidity environments.

5.  New high efficiency constant current driver.Wide range of input voltage:AC100-240V.

6. No delay start.No waiting.It can reach its normal light as soon as it is turned on. No noise.

7. No electrical wave,conforming to CE.

8. Environment friendly and no air pollution.We exert the design of using cold light source.It's no heat radiation.There is no ill to our eyes and skin.The floodlights do not have lead,hydrargyrum and any other contamination.It is really environment friendly with RoHS certificate.

Applications:

Factory,gym,dock,billboard,building,tunnel,landscape,city lighting projects.

MAIN SPECIFICATIONS (T=26℃)
NUMBER	ITEM	DESCRIPTION
01	Input Voltage	AC100-240V 50~60Hz
02	LED	1 PC
03	Power	100 W
04	LED Efficiency	80-90Lm/W
05	Initial Flux	>8610Lm (Cool White)    >8760Lm (Natural White)    >8230Lm (warm white)
06	Power factor	>0.95
07	Color	Warm White /Natural White / Cool White/Red/Green/Blue/Yellow
08	Color Temperature	2700-3300K (Warm White)  4000-5000K (Natural White)  5300-7000K (Cool White)
09	Center Illuminance	2M: 1210 Lux 4M:  356 Lux 6M:  186 Lux
10	Beam Angle	100°
11	Life Time	>50,000 Hours
12	Operating Temperature	-40℃ to +55℃
13	Storage Temperature	-25℃ to +65℃
14	Connect Wire	Brown（L） Blue（N） Yellow/Green（G）
15	Certifications	CE, RoHS
16	Weight	6.8 KG
17	Size	360×285×100 mm
18	IP Code	IP65

Light distribution graph:

LED Lumen Attenuation:

Operating time(hours)	Lumen decrease(%)
5,000	2.4
10,000	5.2
20,000	11.3
50,000	24.5

Demensions:Notes:

1. All dimension units are milimeters.
2. All dimension tolerance is +/- 0.5mm unless otherwise noted.


Safety Notice for Using:

1. Please always use the light out of its package.

2. Before starting use of the light,please check if the light was damaged during transportation.If any damage shown,please Do not install or use it.

3.Any maintenance should be performed by trained professional only.

4. Keep packaging materials away from the reach of children and pets.Risks of suffocation!

5. Caution: The packaging contains small parts that may be swallowed by children.

6. Never leave childern unattended in the vicinity of the lights and do not allow them to play with electrical devices.

7. Try to avoid looking directly in the LED beam-especially for extended periods of time.Do not shine the LED light in another person's eyes.

8. Never cover the light by other objectts.

9. The products need to re-pair,inspection or special treatment of retirement after service time.

10. The products need to re-pair,inspection or special tratment of retirement after service time.

Maintenance:

1. Prior to cleaning the light,make sure it has been disconnected from the power supply.

2. Use a dry or slightly moistened cloth for cleaning.

3. Never use any chemicals or abrasives for cleaning.

Proposal:

Used electronic devices must be collected for recycling and can not be deposited together with daily garbage.

Installation:

1. This product should be installed by trained electricians.

2. Check  integrality of the products when unpack the packing.

3. When laying the cables,make sure that the cables and plugs are not subjected to any tensile or twisting forces. Fit the cable tension relieving mechanisms to the connection points of the surface-mounted lights.Do not kink cables.Output cables should be laid separately and at a distance from other cables.

4. Proceed by connecting the wiring cables to the luminaries.Usually,the brown(or black) wire is the ive wire,connect it with the terminal marked "L".The blue wire is Naughty wire,connect it with the terminal marked"N".

5. Used only the LED driver included,and do not connect the surface-mounted lights to other loads.

6. Do not remove the name plate of the power supply and driver of the light.

Notes:

Non-professionals are not allowed to disassemble and maintain the products.We have the right not to provide after-sales service if unauthorized disassembly and maintenance happens to the products.

Any comments, please feel free to contact Amber Zhu: amberzhu0915@gmail.com or call Amber Zhu: +86  18948177087,or add Amber Zhu's skype account: amber.zhu88